Fabric Details: Outer Layer - 90% modal, 8% spandex, 2% silver-ion fabric - Inner Layer: 85% modal, 8% alginate fiber, 7% spandex.
Size Small - 30cm earpiece to earpiece wide, 11cm tall.
Size Medium - 31cm earpiece to earpiece wide, 13cm tall.
Size Large - 32cm earpiece to earpiece wide, 15cm tall.
Do not wash carbon filter. It is recommended to replace the carbon filter after 70 hours of use. PM2.5 filters can be used as a replacement filter.
CAN I WASH MY MASK WITH THE NOSE PIECE IN IT?
We highly recommend removing the nose piece when washing the mask, especially if they are machine washed. Leaving the nose piece in the mask could tear the mask fabric.
WHEN I INSERT THE NOSE PIECE INTO MY MASK IT GETS STUCK HALFWAY THROUGH, WHAT DO I DO?
This can happen sometimes as there are 2 seams in the middle of the mask that the nose wire can get caught on. Rest assured, the narrow pocket is not sewn shut.
Do not try and force the nose wire into the narrow pocket. Instead, check and see what side of the mask the nose wire is getting caught on. Pull the nose wire back a bit and try to guide the wire through the pouch. If the nose wire bends remove the nose wire and straighten on a flat surface and attempt again.
With a bit of practice you will be able to consistently insert the nose piece into the narrow pocket without much effort.
THERE IS AN ADHESIVE STICKER ON THE NOSE PIECE, SHOULD I REMOVE IT?
When designing this mask we choose to use a standard 9cm long by 0.5cm wide nose piece so that they are easy to find and replace. The nose pieces we include are a part of that standard design and they come with an adhesive sticker on one side.
We do not recommend removing the adhesive sticker as it will make it more challenging to insert the nose piece into the mask.
HOW LONG WILL THE NOSE PIECE LAST?
The Nose Piece can continue to be reused for as long as you find it can hold it's shape. We are now carrying additional nose wires available for purchase on our website here.
IS THERE A FRONT AND BACK OF THE NOSE WIRE?
While there is an adhesive side and plain side of the nose wire, you can insert the nose wire into the mask in either direction. Most of the people who we talk to insert the wire with the adhesive side facing outwards.
HOW LONG DO THE FILTERS LAST?
The Filters are designed to last between 70-100 hours of use before it is recommended that they be replaced.
WHERE CAN I GET MORE FILTERS?
The filters that we use in our masks are a PM2.5 filter, which is quite common and can be purchased in many stores or online. We sell extra filters on our site as well, and can be purchased here.
CAN I WASH MY FILTERS?
Washing your filters is not recommended and can ruin the filters effectiveness. We highly recommend removing the filters when washing your masks.
IS THERE A FRONT OR BACK OF THE FILTER?
When inserting the filters into your mask you can place them in either direction.
HOW DO I MEASURE MY FACE?
When it comes to taking proper measurements for a Devon + Lang face mask here is what we recommend doing;
For measuring the width, take a ruler or tape measure, and start at the middle of your upper lip and measure to just before your ear canal on your right or left ear. Doubling the number you get will give you the approximate length you are looking for.
For measuring the height, we recommend measuring from the bridge on your nose to just under you chin.
Please note that our masks have some stretch in them, so if you are in between sizes we recommend sizing down.